BALL MACHINE INFORMATION

Ball Machine Use Policy:

1. Ball machines may be used on court 4 and 5, only.

2. Ball machines may not be used during Prime Time.

3. If you are using the KTC ball machine, you must book the court with you as the first player and the "KTC Ball Machine" as the second player. A third player may also be added if desired as player #3.

​

​

Steps for Ball Machine Use:

1. Roll ball machine to sit behind the back line of the court (centred)

2. Click the silver switch to the on position

3. Press the black button (behind the remote) down

   1. This causes the machine to use the internal battery​

4. Click the red power button​

   1. If the machine doesn't turn on, click the black button again then click the red power button again​

5. Click and hold the height button until the light is roughly in the middle​

6. Set the speed to 40

7. Set the feed to 2

8. Click and hold the spin button until the light is roughly in the middle

9. Press the pause button to start the machine and adjust any settings

10. Once the settings are to your liking, pause the machine and bring the remote to the opposite side of the court​​

    1. You can adjust settings with the remote from the other side of the court​

    2. You may have to lift the remote above your head for it to reach the machine

    3. You should hear a beep when you adjust any settings with the remote

11. Press the stop/start button with the remote to start the machine again​

​

The machine may not start properly if there are loose balls in the base of the machine. Ensure the machine is turned off before you check for any loose balls.

​

The machine does not need to be plugged in while in use.